Detailed Product Description

AUTOMATIC DIGITAL BLOOD PRESSURE MONITOR UPPER ARM TYPE
HERS HD-200M

Features:

ACCURACY/MEMORY

1.      Irregular Heartbeat(1 HB) Indicator

2.      Multi-user 6 x 90 Memories FOR RECORD COMPARISON.(Sys. Dia. Pulse. Date/Time Indication)

3.      AC/DC(6v)  0.6-1A  Adapter jack (OPTIONAL ACCESSORIES)

4.      PC LINK(RS232 Connector Cable) jack (OPTIONAL ACCESSORIES)

5.      Automatic one-touch measurement.

6.      Automatic Power off Button.

7.      Mean Artery Pressure (MAP- PP) signal showing Function (OPTIONAL)

MAP  Mean Artery Pressure,

It reflects the blood pressure of an artery when an artey expands to Its maximum capacity when volume of blood come to an artery. There is a

Slight difference between the actual measured MAP and the calculated

Map : This difference can be a reference for doctors or users.

PP =Pulse Pressure

It is the difference between Systolic and Diastolic BP. Somewhere It carries meaning in relation to arterial stiffness because Pulse Pressure ` Cardiac Output x Arterial Stiffness.

8.      Available for Both Automatic/Stethoscope measurement (OPTIONAL)

9.      Heart Beating signal showing

10.  Heart Beating signal showing Mean is Ready for Stethoscpe-Sounding(Auscultatory) measurement

   Stethoscpe-Sounding measurement: (OPTIONAL)

   This unit not only has been designed With Automatic-measurement but

   Also optionally with Stethoscope-sounding measurement Function

   Which is almostwith same measuring process as mercurical sphygmomanometer does except display display with digits.

   Stethoscope Measuring Step:

1.      Continuousy press M.RECALL button for over 5 seconds until Signal Sound display on the screen, then release M.RECALL button,

The Signal Sound will display on the screen, standby for sounding mode.

2.      Place the stethoscopes chestpiece in the artecubital space below the cuff.

3.      Press M.RECALL button again, the motor will start pumping and inflate to high pressure(around 190 mmHg) then start exhausting at an auto pre-set rate during stethoscope sounding measuring, until the end of the measurement. Meanwhile, use the bell side of a combination Stethoscope for clearest detection of Systolic BP and Diastolic BP.

The motor can be pumped up again by continuously pressing

M.RECALL button button for repeat Stethoscope sounding measurement.

HOW TO USE IT CORRECTLY:

1.      Face palm upwards, wrap cuff around Upper Arm and fasten properly

2.      Hold the monitor at Heart Level (The Carry Box may be used for support)

3.      Press the START/STOP Button, Your Upper Arm Blood pressure will be measured accurately in half a minutes.

SPECIFICATION:

Measurement Method:  Oscillometric 

Measurement Range : Pressure - 20  - 280 mmHg

Pulse rate  40 - 200 beats/min

Accuracy:  Pressure -+-- 3 mmHg

Pulse rate -+-- 5% of reading

Memory:  90 Memories or 6x90 Memoriies

Power Supply: DC 6V, AA 1.5V X 4 batteries

Display: Large Digit LCD

Oper. Temp./ Humidity: 10C to 40C, 40PECENT

Storage Temp./Humidity: 10C to  60C, 10 to 95 RH

Weight of Main Unit: Approx. 650g (ex. batteries)

Certificate

1. FDA 510(K) approval

2.  CE 0434 approval

3.  RoHs compliance

4.  EMC Test Report

5.  GMP